• black_mdf_a
  • black_mdf_b
  • black_mdf_c
  • black_mdf_d
  • black_mdf_e

Black MDF

MDF is a special type of composite wood produced by residues from the wood industry and mixed with glue. MDF is dimensionally stable and easy to work with. This type of MDF is mixed with black colour to make it black all the way through.
3 mm is currently out of stock, in unknown time.

Facts

Technical description: Medium-density fibreboard
Weight: 0,75 g/cm3
Tolerance, thickness: +/- 10%

In stock with possibility for same-day delivery.

Thickness A4 A2 A1
3 mm € 6 € 8 € 13
6 mm € 6 € 10 € 18
10 mm € 26

All sizes are in cm. All prices are inclusive of 25% VAT

Delivery from 1-5 days.

Thickness 207×140 280×207 244×122
3 mm € 40
6 mm € 65
10 mm € 165
12 mm € 106
16 mm € 135
19 mm € 161

All sizes are in cm. All prices are inclusive of 25% VAT.


Useful to know

MDF is a special type of composite wood produced by residues from the wood industry and mixed with waterproof glue. MDF is dimensionally stable and easy to work with. MDF is often used for model making, prototypes and finished furniture or installations. This type of MDF is mixed with black colour to make it black all the way through.

MDF is NOT suitable for outdoor use or in moist environments. Waterproof MDF should be used in such cases instead. MDF is easy to sand and work with.

MDF is often used for templates, tests and prototypes, models making, props, furniture, jewellery and displays.

As MDF is a composite product, colour can vary from sheet to sheet.

Vector and raster engraving

Both vector and raster engraving are possible. Raster engraving is only possible in A formats.

Laser cutting

Top –  A slight darkening of the wood will appear along the score lines. This can be removed by applying a film before cutting. You can choose to add this option when you place your order.

Edges – The edges look brownish and can rub off. This can be removed by wiping with a cloth or lightly sanding. The thicker the MDF, the darker the edges.

Bottom – There will be some discoloration on the bottom after the cutting process. Usually it is a honeycomb pattern, depending on the material on which it has been cut. You can opt to add a protective film to your order, which will remove most of this. For A formats, you can also choose to add a double-sided adhesive tape, enabling you to put your design up on a wall without the use of any nails and screws.

Finishing treatments

MDF can be painted, oiled or lacquered to protect the surface and edges. The oil gives MDF a rich, more intense colour.