Stainless Steel

Stainless steel.

Facts

Technical description: Stainless 304
Weight: 8 g/cm3
Tolerance: +/- 5%

Production from 5-8 days.

Thickness 100×50 100×100 200×100
1 mm € 74 € 133 € 240
1.5 mm € 104 € 233 € 360
2 mm € 133 € 253 € 479
3 mm € 193 € 373 € 719

All sizes are in cm. All prices are inclusive of 25% VAT.

There are no A sizes in this material.

Useful to know

Suitable for interior design, facades, signage, prototypes, etc. Can be used for outside purposes without treatment.

Laser engraving

Unfortunately, it is not possible to laser engrave stainless steel.

Laser cutting

Top side – No burn marks, but small soot markings can appear from the laser cutting. These can easily be wiped off.

Edges – Appears sharp and in the same colour as the material.

Bottom side – Small scratches can appear from the foundation from which the plate is laser cut. Soot markings can appear. These can easily be wiped off. The lower edge can be very sharp after the laser cutting and should therefore be rubbed down.

Finishing treatments

Steel can easily be painted after laser cutting. It is recommended to wipe off the plate with acetone (or similar) before painting.