Useful to know

Suitable for indoor signage, model making, invitations, prototypes etc.

Vector and raster engraving

Both vector and raster engraving are possible. The material gains a darker colour in the engraved areas. The thicker the engraving, the darker the colour. However, we do not recommend raster engraving with thicknesses 0.5 mm and 1 mm, as this will have an effect almost equal to cutting.

Avoiding burn marks

At the time of your order, you can choose to add protective film to avoid the worst marks caused by smoke damage and the cutting process. However, the film should be carefully removed immediately after your order has been received, as it can have a tendency to become stuck over time. Protective films are not possible with raster engraving.

Laser cutting

Top –  A slight darkening of the cardboard will appear along the score line. This can partly be wiped away with a light, damp cloth. Alternatively, at the time of your order you can choose to add a protective film to avoid the worst burn marks. However, the film should be carefully removed immediately after the order has been received, as it can have a tendency to become stuck over time.

Edges – The edges look brownish and can rub off. This can be removed by wiping with a cloth. The thicker the material, the more soot that will accumulate around the edges.

Bottom – There will be a certain amount of smoke and marking along the score line, depending on the surface on which the material is cut. If the bottom is visible on the final product, it is most often wiped away with a dry cloth. Alternatively, at the time of your order you can choose to add a protective film to avoid the worst burn marks. However, the foil should be carefully removed immediately after the cut designs have been received, as it can have a tendency to become stuck over time.

Finishing treatments

It is possible to decorate white cardboard with magic markers, pens and suchlike. Due to the smooth surface, not all writing tools are equally suitable. It is a good idea to conduct a test before you initiate a major project.